Advancement in auto technology is happening at a blistering pace

There is no denying about the fact that technological advancements in the field of automobiles are happening at a blistering pace. From safety, convenience to pure entertainment, there isn’t an area left to be discovered when it comes to auto technology. The next few years are an era of a magnificent boom in the landscape of automotive technology. Listed below are few common advances in auto technology that have completely dazzled us.

Source: http://www.jskautomotive.co.uk/blog/3-stellar-advances-in-automotive-technology/

What are the Causes of Antifreeze Leaking?

Antifreeze present in the car’s cooling system plays a major function in helping car’s engine from burning like an inferno, in short from overheating. This antifreeze, also known as coolant is transported from the engine of the car to the radiator, where it is mixed with the air through the vents in the radiator. The air there helps the coolant to cool down before it enters the hot and burning engine once more.

This coolant also travels from the vehicle’s engine all the way to the heater core, where it gets warm so as to provide warmer air for the passengers during the winter season. An antifreeze leak can cause the vehicle’s engine to heat up real fast and enough to cause severe damage to the engine.

The professionals of Jsk Automotive, the acclaimed Hyundai Car Parts dealer have put up few reasons why that might happen in the first place.

Radiator Hoses: The hoses that are connected to the radiator can be the potential culprits of antifreeze leakage. With time, radiator hose wears down, crack and slip. This causes the coolant to leak from in-between the cracks. So it is only fair to check the length of the hoses for any possible signs of damage. There can be one more culprit behind this fiasco, and that are hose clamps, which also deteriorate with time. So don’t forget to take a note of them too.

Radiator Cap: The radiator cap is situated on the top of the radiator. It is imperative that the radiator cap should be pressure tested.  This is particularly important if the engine is overheating and there is a continuous decrease in the level of the coolant with no signs of external leaks. A loose radiator cap or a blown head gasket that hold the pressure will allow the engine to heat up pretty fast and allow coolant to leak to the outside of your engine and onto the ground.

Bad Water Pump: There is one more space from where the coolant can slip and that is from the water-pump housing. The head gasket and the seals surrounding it may fail over time, which causes the bearing to fail in the process, which in turn cause the coolant to leak. This can only be inspected when the engine is running since the leak occurs when the pump is operating.

Also Read: How to replace the brake master cylinder?

How to replace the brake master cylinder?

A brake master cylinder is one of the most crucial components of a vehicle’s brake system. But, how do you know you need a new master cylinder? The most common indication that your brake component needs replacing is the worn seals that leave a trail to follow. This trail is nothing but the brake fluid which may lead to future car problems.

If you think your vehicle needs a brake master cylinder replacement, follow the brake troubleshooting checklist grounded by the experts of the renowned dealers that delivers Spare Parts for Hyundai Amica, Jsk Automotive.

Materials Required

New Brake Master Cylinder Kit	Socket Set
Brake Fluid	Protective Latex Gloves
Line Wrenches	Safety Glasses
Show Towels	Screwdriver
Open End or Box Wrenches	Soap and Water

 Step 1: Before you start unscrewing the cylinder, try to remove as much fluid as possible from the main brake cylinder. To extract brake fluid from the master cylinder, use Turkey Baster.

Step 2: Now start removing various components that lead directly to the master cylinder. Carefully remove all the tubes and components like brake booster vacuum hose so that you can easily reach the master cylinder.

Step 3: Now, search where a fluid level sensor is. It is generally located on the plastic reservoir. Locate and unplug it.

Step 4: With the help of line wrench, crack open the brake lines, with the brake master cylinder still secured to the brake booster. There are approximately 4 brake lines connected to the master cylinder. Tighten them once again to avoid any leakage or spillage.

Step 5: Now unscrew each bolt that secures the master cylinder to the brake booster. Your new master cylinder will already have a reservoir, so you need to remove the old one.  But, before you pull out the old master cylinder, make sure you have prepped up your new cylinder.

Step 6: Finally using the vice, secure the new master cylinder in place. Once the new master cylinder is installed, add new brake fluid and bleed the brakes.

4 Tools Every Driver Should Have In Their Car

Just because every time when you get pulled over by traffic police, you only get asked for your driving license and registration doesn’t mean that these two are the only important components every driver need to have in their car when out on the road. Most of us would rather fill up our cars with less important and unrequited items than being concerned to pack tools that are needed for our safety on the road. Don’t repeat the mistakes other drivers make and be a responsible driver and a better citizen.

 According to the experts of Jsk Automotive, largest Hyundai Car Parts dealers, every driver should have these handy tools ready in their car in case of an emergency.

Let’s start!

Duct Tape: Yes, you have heard that alright! A duct tape is a life-saving tool for most of the drivers. Why? A duct tape can fix a myriad of car ills and glitches like a damaged car body after a minor collision to slight functional fixes on hoses and other parts. It can literally put together any minor car ill long enough to take it to a mechanic for a more guaranteed repair.

 Tire Pressure Gauge: This is by far the most important safety tool every driver must and should have in their car. It makes sure that your car runs smoothly and effectively. When your car tires have too little or too much air pressure, they are more vulnerable to wheel damage and often times hydroplaning.  Both these scenarios are fatal for your car as well as your life, so make sure you have a tire pressure gauge tucked securely in your car to relieve yourself of the doubt if your tires have enough air in them or not.

Life Hammer: Well, this one is a very small safety component which will hardly take any space inside your car.  It can be kept near the driver’s seat by securing it with the Velcro or a duct tape. You can break the window with it in case of life-threatening scenarios like fire or when you’re stuck inside your car underwater and need to get out. Since it is as sharp as a knife, it can cut through the thick fabric of your seatbelt to help you get out of the car faster in order to save your life.

Jumper Cables: For us, it’s every car driver’s dearest, because a dead battery is a very common occurrence amongst car drivers and these beauties are the only component that can help you wake up your dead battery from a nap. But do you know what a real crisis looks like? When other driver stops just to help you jump start your vehicle and neither of you has jumper cables.

How to Install New Spark Plugs?

What do Spark Plugs do in a Car?

The spark plug is basically a small electric gadget that is plugged into your engine's cylinder head, where it "sparks" to ignite the fuel. The spark plug is attached to the ignition coil through which it creates high voltage needed to spark the fuel and generate combustion within your engine. Faulty spark plugs mean no spark to ignite the fuel, therefore no combustion.

How To Install New Spark Plugs?

Buy a perfect set of replacement plugs: You can either refer to your vehicle's owner manual or an auto parts related booklet at the auto parts store that have all the vital information about your vehicle's make and model and the year of manufacture. There is an array of different combinations of spark plugs and measurements, made of metals like platinum, yttrium, and iridium, etc. Spark plugs made of precious metals like platinum and iridium are slightly expensive than ones made of lesser metals like copper since they have high melting points and can survive up to 100,000 miles. So choose wisely!

If you are not certain about what type to buy, talk to Jsk Automotive for original equipment plugs, who also deals in reliable and high-end Spare Parts For Hyundai I-20.

Clean the area around the threads before installing new spark plugs: When you are inserting new spark plugs, take a good look at the wires for any visible signs of wear and tear and clean up the area around the wire terminal carefully and with caution. You can use a thin wire brush or compressed air to clean the area around the wire connection and make sure the port is clean. Replace the wires if necessary.

Plug new spark plugs and secure them with a ratchet: With the spark plug socket, unscrew each plug from the engine and replace each with a brand new spark plug. Tighten the plugs a bit, but don't over tighten them too much as you can easily strip the thread on the head of the engine and those repairs are way too costly and time-consuming.

Lubricate the plugs prior to installing: Put a small amount of anti-seize lubricant on the plug threads if you are plugging them in an aluminum engine. This lubricant will prevent any sort of reaction between dissimilar metals. You can also apply a small amount of dielectric silicone compound on the inside of the spark plug wire boot so that they can be easily removed in the future.

Things to do When Test Driving a Vehicle

Buying a new car is as exciting as entering your high school. But one must know what they are investing in or if it is actually a right choice for them. Test driving is an incredible way of taking various car models out on the road to drive. In case you are planning to buy a new car or your very first car, you should test drive various car models before sticking to one. Mostly all car dealerships will provide you with an option to take a short drive in any of their cars so that you can make the best choice. A test drive is beneficial to both the customer and the dealership. Customers get the first-hand experience of the working of the car and the dealership can promptly market its line of various car models.

Jsk Automotive, a known dealer of Hyundai Car Parts for all Hyundai car models has grounded few things that you must keep in mind when you are test driving cars.

Here's how to make most out of your test drive

1. Take a passenger to know their experience of sitting in the car and how it feels to them.

2. Drive for at least an hour in town, out on the open or on a motorway, if possible.

3. Try overtaking other vehicles, checking for good acceleration and looking for any blind spots.

4. Try a crowded route to see how well your car maneuvers and hugs the road when cornering.

5. Try braking hard to know of vehicles' stability in emergency situations.

6. If you are allowed to keep the car for an extended time while it's on test drive period, try driving the car with the back fully loaded as well.

7. If the car is equipped with a built-in sav-nav, ask the salesperson to give you a quick brief of the feature.

8. In case you have already made a decision to buy a particular model, try a model similar to the one you have chosen for comparison. You might have something better. 

How to Protect Your Car from Road Salt Damage?

Road salt is commonly found in those states or countries where temperature drop below 0° and the drivers not only had to deal with freezing winter temperatures and warming up their cars in the morning but also stroll their cars through rigid road ice. The same chemical reaction between ice and salt that creates rich and delicious ice cream also keeps our roads free of stubborn and risky ice during the cold winter months.

While road salting is hugely beneficial and convenient for melting ice off the roads, it is also packed with certain drawbacks. It can cause severe body and undercarriage damage to your vehicle unless you are following recommended tips and tricks curated by the experts of JSK Automotive, Importer of Hyundai Car Parts.

Wax your car: As the winter approaches, start waxing up your car. Though the undercarriage is the place most prone to rusting, giving your whole vehicle a good coat of wax before severe winter conditions begin is a great step towards safeguarding your vehicle against any form of road salt damage.

Steer clear of puddles and plow trucks: Puddles tend to hold a maximum amount of salt due to the accumulation of larger chunks of ice there. Driving behind the plow trucks means you'll be the first one to go through the first layer of salt.

Prepare your car's undercarriage: Numerous repair shops offer an oil solution pre-treatment that can be applied on your vehicle's exposed and damage prone parts. Spray a good amount of oil on your vehicle's undercarriage as the oil will prevent salt and water from sticking to your vehicle's metal parts.

Wash your vehicle after a snow shower: In case, your car has been out while it was snowing or you are hit by a snow storm, wash your car thoroughly and get the salt off as soon as possible.

Use an under spray: A good wash up of your car will only clean the exterior and not the undercarriage, which should be paid utmost attention. Either opt for a drive through car wash or a hand wash that sprays under the vehicle.

All-weather carpets: Once inside the car, you make sure to get warm up as soon as possible. But the time when you are warming up, the salt and snow on your shoes are melting right into your carpet. The perfect and the best solution to this is to lay out all weather carpets inside your car and peel them off before spring.